 |
Product Description
The ID07 Impact Drill/Wrench delivers impact torque of up to 500 ft lbs (675 Nm). It is capable of breaking loose some of the toughest bolts and nuts. The ID07 can drive wood augers into the hardest salt-cured or creosote-treated ties without reaction torque to the operator.
The STANLEY ID07 Impact Drill is two hydraulic underwater tools in one - an impact wrench and a wood drill. The .” square drive impact wrench delivers torque up to 500 ft lbs and can tighten or loosen nuts and bolts and drive lag screws. Use the ID07 with the 05079 adapter and wood boring bits to drill up to 11⁄16” diameter holes into timber with no reactive torque to the diver. Trigger guard and hi‑visibility yellow paint is standard.
Features
• Large trigger
• Reverse-flow check valve prevents operation if the tool is plumbed backwards
• Built in selector for Open Center or Closed Center systems
• Feathering ON/OFF
Specifications
Application: Tightening and loosening nuts and driving lag bolts.
Capacity: 7/16 in. Quick Change or 1/2 in. Square Drive
Hyd. Flow: 4-12 gpm / 15-45 lpm
Weight: 7.2 lbs / 3.3 kg
Length: 8.5 in. / 21.6 cm
Width: 4.5 in. / 11.4 cm
Connection: 3/8 Inch, NPT Pipe Fitting
| Model | Part No. | Weight | Length | Width | Flow Range | Working Pressure | Full Relief Setting | Torque | Capacity | Connect size and type | Misc. |
| ID07 | ID07810 | 7.2 LBS / 3.3 KG | 9 IN. / 23 CM | 5 IN. / 11 CM | 4-12 GPM /15-45 LPM | 750-2000 PSI /50-140 BAR | 2250 PSI /155 BAR | 500 FT LBS | 7/16 IN. QC CHUCK | ||
| ID07815 | 7.2 LBS / 3.3 KG | 9 IN. / 23 CM | 5 IN. / 11 CM | 4-12 GPM /15-45 LPM | 750-2000 PSI /50-140 BAR | 2250 PSI /155 BAR | 500 FT LBS | 7/16 IN. QC CHUCK | TRIGGER GUARD | ||
| ID07820 | 7.2 LBS / 3.3 KG | 9 IN. / 23 CM | 5 IN. / 11 CM | 4-12 GPM /15-45 LPM | 750-2000 PSI /50-140 BAR | 2250 PSI /155 BAR | 500 FT LBS | 1/2 IN. SQUARE DRIVE | PIN RETAINER | ||
| ID07830 | 7.2 LBS / 3.3 KG | 9 IN. / 23 CM | 5 IN. / 11 CM | 4-12 GPM / 15-45 LPM | 750-2000 PSI /50-140 BAR | 2250 PSI /155 BAR | 500 FT LBS | 1/2 IN. SQUARE DRIVE | FRICTION RING | ||
| ID0782001 | 7.2 LBS / 3.3 KG | 9 IN. / 23 CM | 5 IN. / 11 CM | 4-12 GPM /15-45 LPM | 750-2000 PSI /50-140 BAR | 2250 PSI /155 BAR | 500 FT LBS | 1/2 IN. SQUARE DRIVE | CE | ||
| ID0792001 | 7.2 LBS / 3.3 KG | 10 IN / 25.4 CM | 4¼ IN/ 10.8 CM | 4-12 GPM / 15-45 LPM | 750-2000 PSI / 50-140 BAR | 2250 PSI /155 BAR | 500 FT LBS | 1/2 IN / 12.7MM Square Drive | 3/8" MALE PIPE ADAPTER | UNDERWATER |